Towards the end of that video I ran over a patch of water weeds at low speed and they blocked the intake 😅
If you go quicker they don’t get stuck on the intake 😎

STL files for 3D printing can be purchased here for $24.98USD: https://www.myminifactory.com/object/3d-print-82025

Build guide PDF: https://www.simply3d.co.nz/buildguide

All proceeds go towards filament and hardware for new projects. Thank you kindly for your support!
Below, I have a ramble about the boat, I talk about changes I had planned. All of these changes have been incorporated into the design since. If you have any questions feel free to contact me – I usually reply within 24 hours 🙂

Here are some pictures of the project. Check the link above for photos of boats made by others.